Introduction

Clean room

Controlled environments

ESD

Reusable technical clothing

With the use of reusable Tecnica by Technotex products we collaborate in a circular economy, reducing the environmental impact and generating local employment

10

Fabrics

At Técnica by Technotex ® we have developed up to 10 new fabrics, specially designed to meet the specific needs of our customers. In addition, we remain committed to continuously developing new fabrics and thus offer new and effective solutions in the dispersal of bacteria and particles.

We offer a reusable textile alternative for those companies that require environmental pollution control.

We have been supplying, for years, technical clothing to the main pharmaceutical, cosmetic, ESD, Electronic and food companies. Ask us for references!

Locker room: clean room, clean area and ESD

We offer a complete range of clean air technical garments designed from our smart and technical fabrics , contributing to the improvement of worker comfort.

Clean production areas are necessary in all industries where micro-organisms and foreign particles can damage production processes or contaminate products. They are essential in industries such as pharmaceuticals, food processing, electronic components, cosmetics, automotive , etc.

Overalls
Pajamas
Gowns

Environmental pollution

The most common environmental pollution in production areas is produced through particles that are distributed in the environment:


Bacteria transport: The skin flakes generated by people, the fibers and fluff that come off traditional cotton-containing fabrics are pollutants and act as transport vehicles for bacteria and microorganisms.

Unwanted particles: particles of human origin (scales, hair etc.) and foreign bodies (plastics etc.) arriving to products during manufacture and handling.


A suitable clothing with clean fabrics contributes effectively to the reduction of this type of contamination. It is recommended to avoid polyester / cotton garments, which give off fibers and lint and do not act as a filter or barrier against microorganisms.

At Technotex ® we offer appropriate clothing, designed with clean, technical fabrics and a barrier to microorganisms, which contribute to greater environmental cleanliness and an effective reduction of the risk of physical and biological contamination.

Performacne-Verification-Checklist-1500x

Clean Room - Pharmaceutical

Environmental cleanliness - Physical contamination

Pollution control and air quality in clean rooms is a key element to positively influence the process and the quality of a product.

The most frequent contamination occurs through skin flake particles that people generate and that are distributed in the environment.

There are currently technical fabrics specially designed to effectively reduce this type of pollution: clean air and a particle barrier.

All our fabrics meet the quality requirements ISO 5 - GMP class A / B.

Vestuario Sala blanca

Main benefits

Easy

Maintenance

Great

Comfort

European manufacturing

Tailored

Lightweight and breathable

For long time use

Microbial barrier

Recommended garments

Regulations that must been followed

Our technical fabrics are designed to meet the highest quality requirements and ensure the maintenance of their technical and comfort properties.

 

  • Made with multi-lobular yarns, widely used in sports and leisure activities, which provide moisture management systems for effective breathability.

  • They transport moisture to the outside

  • Fresh air circulation inside

  • Faster drying speed

  • Comfort: Light, soft, breathable garments with a pleasant texture

  • Outstanding durability

  • Easy maintenance

 

MEET THE QUALITY REQUIREMENTS OF THE FOLLOWING REGULATIONS:

 

  • ASTM F51 Cleanroom Particulate Contaminants

  • EN31092 Resistance to water vapor (comfort)

  • ISO 22612 Resistance to microbial penetration

  • ISO 9073-10 Cleaning of particulate matter (linting)

  • ISO 10993 Cytotoxicity

PHARMA

CEUTICAL

AGRO FOOD

COS

METHICS

Environmental cleanliness - Physical contamination

Pollution control and air quality in clean rooms is a key element to positively influence the process and the quality of a product.

The most frequent contamination occurs through skin flake particles that people generate and that are distributed in the environment.

There are currently technical fabrics specially designed to effectively reduce this type of pollution: clean air and a particle barrier.

All our fabrics meet the quality requirements ISO 5 - GMP class A / B.

Recommended garments

Regulations that must been followed

Our technical fabrics are designed to meet the highest quality requirements and ensure the maintenance of their technical and comfort properties.

 

  • Made with multi-lobular yarns, widely used in sports and leisure activities, which provide moisture management systems for effective breathability.

  • They transport moisture to the outside

  • Fresh air circulation inside

  • Faster drying speed

  • Comfort: Light, soft, breathable garments with a pleasant texture

  • Outstanding durability

  • Easy maintenance

 

MEET THE QUALITY REQUIREMENTS OF THE FOLLOWING REGULATIONS:

 

  • ASTM F51 Cleanroom Particulate Contaminants

  • EN31092 Resistance to water vapor (comfort)

  • ISO 22612 Resistance to microbial penetration

  • ISO 9073-10 Cleaning of particulate matter (linting)

  • ISO 10993 Cytotoxicity

Environmental cleanliness - Physical contamination

Contamination of food by microbiological agents is a public health problem.

When it comes to physical contaminations, we refer to those constituted by particles and foreign bodies that reach the food during its handling. The use of appropriate clothing, with clean, technical fabrics and a barrier to microorganisms, contributes to greater environmental cleanliness and an effective reduction of the risk of physical and biological contamination.

We recommend avoiding the use of cotton or polyester / cotton textile garments. These traditional textiles shed fibers and lint and do not act as a filter or barrier to the microorganisms that people disperse during their movements.

Recommended garments

Regulations that must been followed

There are several applicable regulations and biosafety measures in the production area, among the most prominent:

 

  • Regulations (EC) No. 852, 853 and 854/2004 of the European Parliament and of the Council.

 

  • Law 17/2011 Food security and nutrition. Relating to the hygiene of food products, they describe the importance of clean and adequate clothing.

 

  • BSI PAS 220 2008, issued by the British Standards Institution, which defines the requirements and protocols for food safety management systems designed according to ISO 22000.7 / 2005.

 

In all of them, the importance of adequate clothing according to the level of environmental risk, which is clean and in good condition, is described.

PRODUCTO
ESTADO
NIVEL SANITARIO - RIESGO
NIVEL DE RESPONSABILIDAD
Ahumados/Productos tratados
ALTO
ALTO
Productos congelados
MUY ALTO
MUY ALTO
Envasado
ALTO
ALTO
Tratado
ALTO
MUY ALTO
Leche y productos lácteos
Fresco
ALTO
MUY ALTO
Envasado
ALTO
ALTO
Fileteado
MUY ALTO
MUY ALTO
Pescado y derivados
Vivo/Fresco
MUY ALTO
MUY ALTO
envasado
ALTO
ALTO
Picada
MUY ALTO
MUY ALTO
Carne y Producto cárnicos
Fresco
MUY ALTO
MUY ALTO
Tratado
Alto
ALTO
Frutas y verduras
Fresco
Bajo
ALTO

Suspended particles in the environment are a transport vehicle for bacteria. We can significantly reduce them by using clean air technical fabrics that do not emit lint .


A healthy individual can air disperse approximately 5,000 human skin flakes per minute. These scales are often carriers of microorganisms and bacteria. Personnel who work inside, or enter areas where food is exposed and / or in the process of being handled, should wear suitable work clothes with clean textiles and a barrier to this type of particles.


Work clothes should not have buttons or pockets facing outwards above the waist level and it is highly recommended to use closures on sleeves and ankles to avoid contamination by particles of the user from inside the garment to the outside.


Work clothes must be washed with the appropriate standards and periodicity for the intended use and adequate areas must be provided for staff (changing rooms, sinks, bathrooms, etc.).

hero_large.jpg

ESD environment

Our ESD garments are recommended for electrostatic protection environments, clean rooms and areas with very dry environments.

 

We use clean and conductive fabrics that meet the technical standards of EN 61340-5-1: 2016. They contain the carbon filaments necessary to maintain, permanently, the properties of electrostatic dissipation.

 

Helps minimize the negative effects of electrostatic fields, increasing worker safety and avoiding damage or defects in electronic products.

DY87O35VMAAs6Nu.jpg

Main benefits

Easy

Maintenance

Made with microcarbon

Great

Comfort

Lightweight and breathable

European manufacturing

For long time use

Tailored

Microbial barrier

Recommended garments

Regulations that must been followed

Our technical fabrics are designed to meet the highest quality requirements and ensure the maintenance of their technical and comfort properties.

 

  • Made with multi-lobular yarns, widely used in sports and leisure activities, which provide moisture management systems for effective breathability.

  • They transport moisture to the outside

  • Fresh air circulation inside

  • Faster drying speed

  • Comfort: Light, soft, breathable garments with a pleasant texture

  • Outstanding durability

  • Easy maintenance

 

MEET THE QUALITY REQUIREMENTS OF THE FOLLOWING REGULATIONS:

 

  • ASTM F51 Cleanroom Particulate Contaminants

  • EN31092 Resistance to water vapor (comfort)

  • ISO 22612 Resistance to microbial penetration

  • ISO 9073-10 Cleaning of particulate matter (linting)

  • ISO 10993 Cytotoxicity